Question 1

Can Noise & Dust Control Enclosures be installed on existing equipment or structures?

Accepted Answer

Absolutely, these enclosures are designed specifically to protect your equipment or personnel. They’re designed to integrate existing equipment or structures using a pin-and-pocket framing system and to allow installation without modifying the underlying structure. Essentially, these enclosures will meet you where you’re at in terms of jobsite needs and envelop the desired equipment.

Question 2

Can the enclosure be relocated if the equipment is moved?

Accepted Answer

Yes. The frame and fabric can remain in place during short moves. They can also be disassembled for transport and storage when relocating equipment. A good tip when fully disassembling the equipment is to keep the fabric panels and frame pieces organized and the labels visible to speed up reinstallation.

Question 3

What materials are the framework materials for Noise & Dust Control Enclosures?

Accepted Answer

The framework is engineered for quick, efficient installation and removal using a pin-and-pocket system that integrates seamlessly with your existing structure—eliminating the need for any modifications to your current equipment. Fabric components are clearly labeled to streamline assembly and reduce installation time. High-performance fabrics are carefully selected to match the specific conditions of your jobsite, ensuring long-term durability and resistance to weather, dust, and operational wear.

Question 4

What maintenance is required for these enclosures?

Accepted Answer

Inspect and clean fabric components regularly to maintain performance and extend enclosure lifespan. If you notice damage, such as rips, cut straps, or loose-fitting pieces, please notify us, and we can make a replacement section and send it to you.

Question 5

What’s the turnaround on a Noise & Dust Control Enclosure?

Accepted Answer

The entire process takes about 6-7 weeks. This includes: Your initial consultation Reviewing the provided mechanical drawings of the unit Design approval Sourcing and gathering materials Final production of the custom rig enclosure And delivery directly to your site

Question 6

What’s the importance of custom fitting for Noise & Dust Control Enclosures?

Accepted Answer

Custom measurements maximize noise and dust containment when equipment is operating in sensitive acoustical environments. This keeps sensitive environments (e.g., housing, retail, or other work crews) around the enclosure free of dust and reduces noise levels, allowing the equipment to operate at maximum efficiency.

Question 7

Can I order individual parts of an existing Noise & Dust Control Enclosure instead of re-doing all of it?

Accepted Answer

When the enclosure is designed, your records of all the specific pieces are kept on file. We can absolutely provide individual sections for an order.

Question 8

Can the Noise & Dust Control Enclosure be repaired instead of being replaced?

Accepted Answer

Repairs are not recommended over replacement, as the labor required to repair can be quite costly. It’s a good practice to assess what a repair would cost and compare that cost with a replacement. Even if the repair costs less than a replacement, it may not address the fact that the rest of the tarp is worn down (become brittle, coating is gone, etc.). Chances are you'll only need a few new panels and not the full enclosure. Talk to our rig enclosure experts to determine what works best for your situation.

Noise & Dust Control Enclosures

SAFER AND QUIETER WORK ENVIRONMENT

Features

Frequently Asked Questions

GEAR POINTS

Protect

Withstand

Resist

Fit

Perform

Related Products

Drilling Rig Enclosures

Tank & Skid Enclosures

Building Covers and End-Wall Panels

Industrial Divider Curtains

Get in Touch and Outperform

Features

Drilling Rig Enclosures

Tank & Skid Enclosures

Building Covers and End-Wall Panels

Industrial Divider Curtains